Here are a few tips on how to give your LED signs the tender loving care they need.
A LED sign give many benefits to any business, as it can attract more potential customers. But as time goes by, your lights can get dirty and dysfunctional, especially if you do not maintain it. If you allow this to happen, they would not be able to lead customers to your customers. No idea how to clean the lights? Then you’re in luck. Here are a few tips on how to clean and maintain your signs.
Wipe the dirt with a microfiber towel.
For simple dust, a microfiber towel or cloth would do. But if it has water stains, use a mild soap water solution. The water should also be a bit warm. Scrub the stains gently using a clean microfiber cloth or a soft-bristle brush. Rinse with clean tap water and use a soft cloth to dry. Make sure you keep it dry to avoid getting water spots. Do this regularly to keep the lights always looking brand new and bright.
Remove stubborn dirt or graffiti with alcohol.
If your sign, unfortunately, fell victim to unwanted graffiti, you don’t have to worry as much. Spray paint or permanent marker is not that tough to remove. You can remove the defacement with household products, one of which is isopropyl alcohol. You can also opt to use fast-drying thinner like VM&P Naphtha or air dry acrylic lacquer such as Lacryl as well. All you have to do is apply the product directly to the affected area and gently wipe with a microfiber cloth.
Allow them to take a rest.
If your shop isn’t open for 24 hours, you can turn off your outdoor or indoor scrolling LED sign. Turning it off regularly not only saves energy but also spares it from working unnecessarily. It will also allow it to have a longer life if you let it rest. On the other hand, if your shop is open 24/7, you can get two of each sign so you can power down one while the other is on.
Do routine checks.
Routine checks will prevent problems from arising in the future. Check for weather damage, sub-par performance, and whether the cords and wires are still intact. Keep an eye out for open wires to prevent electrocution or fire.
In summary, clean your LED signs or a regular basis. This is especially the case if your shop is located in desert areas like California and Nevada where signs will likely be covered in dust and dirt. Proper maintenance will also lengthen the life of these signs.
Comments
Post a Comment